Everything you need to clean, hydrate and calibrate pH probes as well as clean and test conductivity (ppm/EC) probes.
The instrument is only as accurate as the probe is clean. Accurate readings simplify crop management and provide improved growth. Probe cleaning and correctly storing pH probes ensures you get the most accurate readings possible and will maximise the life of a probe.
The probe surface is where the instrument takes the reading of the solution or soil/media. If the probe face is dirty or contaminated, the readings may be inaccurate. Much like the windshield of a car, if it’s dirty you can’t see out! If the probe face is dirty, it cannot read the solution or soil accurately.
A tip… if the conductivity reads low, the probe needs cleaning. pH probes specifically, should be kept wet at all times for optimal performance and life.
Now isn't that Handy!
If you need a tight duct bend use a 90 Degree Duct Elbow, because flexible ducting bent tightly can cause huge restriction of air flow.
The RVK 150 A1 is a 150mm/6 inch fan, offering low wattage with high power, capable of delivering a maximum air flow of 428 m3/h.
CANNA CalMag Agent can be used to raise the Calcium and Magnesium content of your soft water, which will increase the EC of it. Which will improve your water to make sure your plant can grow strong and healthy.
Premium bands to secure your new pre-filter to a CarboAir filter. These have been especially designed and made from the finest material in the UK. Two per a pack.
Everything you need to clean, hydrate and calibrate pH probes as well as clean and test conductivity (ppm/EC) probes.
