Buddhas Tree - Coco A&B

Coco Growers of the World, Rejoice! Buddhas Tree Coco A&B is Finally Here!

For years Buddhas Tree have only specialised in designing and developing top-of-the-line additives, but they’ve finally released a brand new Coco A+B base nutrient! Coco A&B is a premium base nutrient, containing all the essential nutrients a plant needs when grown in this substrate.

• Specifically tailored to the characteristics of cocos substrates
• Highest of quality base nutrient, designed and developed by industry titan Buddhas Tree
• Rich in high-value elements, and highly versatile
• Can be used for both the growth and bloom cycles of plant’s development
• Easy to use, without any added fuss of needing other nutrients
• Uses chelated nutrients for better nutrient absorption and uptake
  
  

Contains:

Buddha’s Tree Coco A+B comes in two sizes: Coco Part A+B 1 litre or Coco Part A+B 5 litres

Coco Part A:                                                  Coco Part B:                                                          

Total Nitrogen: 3.4%w/v                                    Total Nitrogen: 2.5%w/v

Nitrate Nitrogen: 3.4%w/v                                  Nitrate Nitrogen: 1.0%w/v

Magnesium Oxide: 2.7%w/v                              Ureic Nitrogen: 1.5%w/v

Calcium Oxide: 2.7%w/v                                   Phosphorus Pentoxide: 2.0%w/v

Total Boron: 0.0057                                          Potassium Oxide: 1.5%w/v

Total Copper: 0.0053                                        Magnesium Oxide: 1.5%w/v

Total Iron: 0.0053                                             Total Boron: 0.004

Total Manganese: 0.0053                                  Total Copper: 0.004

Total Molybdenum: 0.0008                                Total Iron: 0.004

Total Zinc: 0.0053                                            Total Manganese: 0.004

Total Molybdenum: 0.0006                                Total Zinc: 0.004

Using Buddhas Tree Coco A&B:

Fill your hydroponic system reservoir with water and add equal amounts of Coco Part A and Coco Part B to the tank to achieve the required strength and mix well. Use a syringe or beaker for a more accurate measurement, and a CF/EC/PPM meter check the TDS (nutrient strength). Add more Coco A+B under desired strength is achieved, then add any additives and boosters you wish to use and mix well.

Adjust the pH of the solution to the required level using pH up or down as necessary. We recommend the use of a pH meter such as the Horticare pH meter to help accurately set the pH to the required level. Make sure to avoid contact with skin and eyes and wear suitable protective clothing.

Both parts of a 2-part nutrient are designed to be used together in equal amounts. Using the nutrients in unequal amounts will result in a nutrient solution which is not properly balanced, which will ultimately lead to your plants suffering from deficiencies.

As with all nutrients, boosters and additives, never mix them together in their concentrated form (i.e. straight out of the bottle). Always add each nutrient, booster or additive to your reservoir or feed water in turn, giving the solution a good stir to mix it in before adding the next one. If both parts are added at once they clump together and the plant cannot absorb them both properly.

When adding Coco A+B to your reservoir, use 2-4ml per litre of water. 4ml A + 4ml B per litre per adult plants should have an approx. EC reading of 1.6.